• INTEC TG - Rubber
  • INTEC FLUORO FLOW - Rubber
  • INTEC TEKSIL MRB - Rubber
  • INTEC SB94 - Plastic
  • INTEC SB94M - Plastic
Application: Natural rubbers, nitriles, EPDM, SBR and other commodity grade rubbers.

Benefits:
  • Improved flow
  • Reduced reject rates
  • Better "knitting" of part
  • Reduced mold fouling
  • Reduced "non-fills"
  • Better dispersion of fillers and additives
  • Non-blooming properties
  • Better surface appearance
  • Improves mold release
  • Improved extrusion rate without affecting dimensional stability
  • Improved injection molding rates
  • Reduced heat buildup resulting in less die drag
  • Excellent "bin storage"
  • Improved "wetting" allowing quicker incorporation into polymer
  • No loss of physical properties for most compounds
Composition: Inorganic polymeric modifier.

Properties

Typical

Appearance Dark gray powder
Odor None
Specific Gravity 4.00 +/- .04
Density 3.98
Percent Volatiles None
pH 7.0
Storage Stability Unlimited shelf life

Packaging: 50 LB Bags, gaylords, and drums (special packaging available).

Addition Levels: 1 - 5 phr
Application: Fluoroelastomers. BENEFITS:
  • Improved flow
  • Reduced reject rates
  • Better "knitting" of part
  • Reduced mold fouling
  • Reduced "non-fills"
  • Better dispersion of fillers and additives
  • Non-blooming properties
  • Better surface appearance
  • Improved mold release
  • Improved extrusion rate without affecting dimensional stability
  • Improved injection molding rates
  • Reduced heat buildup resulting in less die drag
  • Excellent "bin storage"
  • Improved "wetting" allowing quicker incorporation into polymer
  • No loss of physical properties for most compounds
Composition: Inorganic polymeric modifier.

Properties

Typical

Appearance Dark gray powder
Odor None
Specific Gravity 4.00 +/- .04
Density 3.98
Percent Volatiles None
pH 7.0
Storage Stability Unlimited shelf life

Packaging: 50 LB Bags, gaylords, and drums (special packaging available)

Addition Levels: 1 - 6 phr
Application: Silicones and Fluorosilicones.

BENEFITS:
  • No affect on compression set
  • Reduced part tear during demolding
  • Excellent resistance to high temperature degradation
  • Improved flow
  • Reduced reject rates
  • Better "knitting" of part
  • Reduced mold fouling
  • Reduced "non-fills"
  • Better dispersion of fillers and additives
  • Non-blooming properties
  • Better surface appearance
  • Improved mold definition
  • Improved mold release
  • Decreases or eliminates spray-on mold releases
  • Improved extrusion rate without affecting dimensional stability
  • Improved injection molding rates
  • Reduced heat buildup resulting in less die drag
  • Excellent "bin storage"
  • Improved "wetting" allowing quicker incorporation into polymer
  • No loss of physical properties for most compounds
Composition: Inorganic polymeric modifier.

Properties

Typical

Appearance Dark gray powder
Odor None
Specific Gravity 4.00 +/- .04
Density 3.98
Percent Volatiles None
pH 7.0
Storage Stability Unlimited shelf life

Packaging: 50 LB Bags, gaylords, and drums (special packaging available)

Addition Levels: 3 to 4 phr is recommended on black silicones. On colors, lower levels should be optimized to achieve both improved performance and color matching.

Application:Plastic Injection molding and extrusion. Recommended for all "dark color" polymer systems, filled or unfilled.

BENEFITS:

  • Certifiable in all resin systems
  • Reduces cycle time by 15% - 30%, sometimes higher
  • No negative effect on part quality
  • Improved flow
  • Improved dispersion of fillers and colors
  • Improved surface appearance
  • Improves part release in most systems
  • Increases regrind usage without polymer degradation
  • Improves processing window
  • Improves dimensional stability
  • Unique gas scavenging ability
  • Reduces mold fouling
  • Improves machine efficiency
  • Non - blooming
Composition: Inorganic polymeric modifier.

Properties

Typical

Appearance Dark gray powder
Odor None
Specific Gravity 4.00 +/- .04
Density 3.98
Percent Volatiles None
pH 7.0
Storage Stability Unlimited shelf life

Packaging: 50 LB Bags, gaylords, and drums (special packaging available).

Addition Levels: Depending on the polymer, system, use levels will range between 0.3% and 4% by weight.

Application: Plastic Injection molding and extrusion Recommended for all " light color " polymer systems, filled or unfilled .

BENEFITS:

  • Certifiable in all resin systems
  • Reduces cycle time by 15% - 30%, sometimes higher
  • No negative effect on part quality
  • Improved flow
  • Improved dispersion of fillers and color
  • Improved surface appearance
  • Improves part release in most systems
  • Increases regrind usage without polymer degradation
  • Improves processing window
  • Improves dimensional stability
  • Unique gas scavenging ability
  • Reduces mold fouling
  • Improves machine efficiency
  • Non - blooming
Composition: Inorganic polymeric modifier.

Properties

Typical

Appearance Dark gray powder
Odor None
Specific Gravity 4.00 +/- .04
Density 3.98
Percent Volatiles None
pH 7.0
Storage Stability Unlimited shelf life

Packaging: 50 LB Bags, gaylords, and drums (special packaging available)

Addition Levels: Depending on the polymer system, use levels will range between 0.3% and 4% by weight.